Samsung Washer Error Code 2E — What It Means & How to Fix It

What Does This Error Mean?

The 2E error means your Samsung washer has a power supply problem. The control board isn't receiving a stable voltage. This can stop the wash cycle mid-run.

Affected Models

WF45R6100AW
WF50R8500AV
WF45T6000AW
Most Samsung front-load and top-load washers

Common Causes

Unstable or low voltage from the wall outlet
Faulty or loose power cord connection
Power surge or brownout in your home
Damaged main control board
Overloaded electrical circuit shared with other appliances

How to Fix It

Unplug the washer from the wall outlet.

Wait 60 seconds before plugging it back in. This resets the control board.
Check the power cord for any visible damage or loose connection.

Make sure the plug is firmly seated in the outlet.
Test the outlet with another appliance to confirm it has power.

A lamp or phone charger works well for this test.
Make sure the washer is on a dedicated circuit.

Avoid running the washer on the same circuit as a dryer or refrigerator.
Plug the washer back in and restart the cycle.

If the 2E error returns immediately, the control board likely needs replacement.

When to Call a Professional

If the error returns after a reset and your outlet voltage checks out — the control board may be faulty. Replacing a Samsung washer control board typically costs $200–$400 including labor. Contact Samsung support or a certified technician.

Frequently Asked Questions

Is the 2E error dangerous?

It can be if caused by faulty wiring or a damaged outlet. Unplug the washer until you identify the cause. Do not use the machine if you smell burning or see scorch marks.

Can a power surge cause the 2E error?

Yes. A sudden surge or brownout can trigger this code. Unplugging the washer for 60 seconds usually clears it. Consider using a surge protector for your appliances.

How much does it cost to fix a Samsung washer 2E error?

If it's just a reset, it costs nothing. If the control board needs replacing, expect $200–$400. Always get a diagnostic first before replacing parts.