6E
Samsung Dishwasher
Severity: CriticalWhat Does This Error Mean?
The 6E error means your Samsung dishwasher has detected a voltage problem. The machine is not receiving stable power. This can damage the control board if left unresolved.
Affected Models
- DW80R5061US
- DW80R9950UG
- DW80K5050US
- Most Samsung built-in dishwashers
Common Causes
- Power voltage at the outlet is too high or too low
- A loose or damaged power connection behind the dishwasher
- The home circuit breaker for the kitchen is faulty or tripping
- The main control board is damaged and reporting false voltage errors
- A power surge or lightning strike that damaged the electronics
How to Fix It
-
Turn off the dishwasher and unplug it immediately.
Never leave the machine running when a voltage error appears.
-
Check your home's circuit breaker panel.
Look for a tripped breaker labeled 'Kitchen' or 'Dishwasher' and reset it.
-
Plug the dishwasher back in and wait 10 minutes before restarting.
This gives the control board time to fully reset.
-
Test the outlet with another appliance to confirm it has power.
If the outlet doesn't work, the problem is the circuit — not the dishwasher.
-
If the error returns immediately, call Samsung support or a technician.
A recurring 6E usually means the control board needs replacement.
When to Call a Professional
Electrical issues should be handled by a qualified technician. Do not attempt to open the control board housing yourself. Repair costs for this error typically run $150–$350. If you suspect wiring damage, call an electrician first.
Frequently Asked Questions
Is 6E dangerous on a Samsung dishwasher?
It can be. A voltage fault means unstable power is reaching the machine. Stop using it until the cause is found. Do not ignore this error code.
Will a power surge cause the 6E error?
Yes. A power surge from a storm or grid fluctuation can trigger 6E. In some cases, it permanently damages the control board. A surge protector can help prevent this in future.
How much does it cost to fix a 6E error?
If it's a breaker issue, it may cost nothing. If the control board is damaged, expect $150–$350 for parts and labor. Always get a diagnostic quote before authorising repairs.