Ad Space — Top Banner

EE

LG Dryer

Severity: Critical

What Does This Error Mean?

The EE error means your LG dryer has a memory fault on its control board. The EEPROM chip — which stores the dryer's operating settings — has an error. This prevents the dryer from running safely until the memory is restored or the board is replaced.

Affected Models

  • DLGX3886V
  • DLGX5681V
  • DLE7300VE
  • Most LG electric and gas dryers

Common Causes

  • A power surge has corrupted the EEPROM chip on the control board
  • The control board has reached end of life and the memory chip has failed
  • A firmware update (if applicable) went wrong and corrupted settings
  • A loose connection between the control board and the EEPROM chip
  • Manufacturing defect in the control board causing early memory failure

How to Fix It

  1. Unplug the dryer from the wall and wait 15 full minutes.

    A deep power reset can sometimes clear a soft EEPROM fault caused by a power glitch.

  2. Plug back in and attempt to start a normal cycle.

    If EE clears and the dryer runs normally, the fault was temporary.

  3. Check your home's circuit breaker for the dryer circuit.

    A partially tripped breaker delivers unstable voltage that can cause memory corruption.

  4. If EE returns on the next cycle, do not continue using the dryer.

    A persistently corrupted control board can cause unpredictable dryer behaviour.

  5. Contact LG support or a certified technician.

    Provide your model number and the EE code. Ask whether a warranty claim applies.

When to Call a Professional

EE is almost always a control board issue — not something you can fix at home. A control board replacement for LG dryers costs $150–$350. Some appliance repair services can re-flash or replace just the EEPROM chip for less. Contact LG support first — if the dryer is under warranty, the repair may be covered.

Frequently Asked Questions

Can a power surge cause the EE error on my LG dryer?

Yes. A sudden voltage spike is one of the most common causes of EEPROM corruption. Using a quality surge protector on your laundry circuit can prevent this.

Is the EE error covered under LG warranty?

If your dryer is within the standard 1-year parts and labor warranty, yes. LG sometimes extends coverage on specific components — check your documentation. Call LG at 1-800-243-0000 to check your warranty status.

Can the EEPROM be reprogrammed instead of replacing the whole board?

In some cases, yes. Certain appliance repair specialists can re-flash EEPROM chips. This is cheaper than a full board replacement. However, it requires specialist equipment and isn't widely available.